How Do I Connect the Suction and Discharge Hoses to My Generac Pump?

To connect the suction and discharge hoses to a Generac pump, attach and thread a gasket and hose barb to each of the threaded flanges using a hose nut. Then attach the flex blue discharge hose to the blue-colored flange and the green suction hose to the green-colored flange, and attach the filter to the suction hose.

  • Apr 5, 2023
  • Knowledge

Title
How Do I Connect the Suction and Discharge Hoses to My Generac Pump?
URL Name
How-do-I-connect-the-Suction-and-Discharge-hoses-to-my-Generac-Pump

Public Answer
To ensure proper functioning of a Generac pump, it is crucial to correctly install the suction and discharge hoses with appropriate gaskets. While the general steps for proper attachment are provided below, it is recommended to refer to the Owner's manual specific to the model for detailed instructions.

To Connect the Suction and Discharge Hoses to a Generac Pump:
 

1. Attach and thread a gasket (A) and hose barb (B) to each of the threaded flanges (C) using a hose nut (D).​

 image.png

2. Attach the flex blue discharge (E) hose to the blue-colored flange by sliding the hose over the barb and securing with a hose clamp.​
 

image.png 
 

3. Attach the green suction (F) hose to the green-colored flange by sliding the hose over the barb and secure with a hose clamp.


image.png
 

4. Attach the filter to the suction hose by inserting the barbed end into the suction hose and securing with a hose clamp.  Then attach the filter end (G).

 
 
Was this article helpful?
Upload Files


Need more help? Get in touch with our support team.


Contact Support