How to remove the side panel cover for GP series inverters. 

This article provides a guide to removing the side panel cover for GP series inverters.
 

Environment

This article applies to GP series inverters: Models: GP2200i, GP2500i, GP3000i, GP3300i

Written instructions: 

1. Use a cross/Phillips screwdriver to remove the two-side cover screws. 
2. Open the spark plug access cover.
3. Remove the side cover by reaching through the spark plug access cover by pushing the side cover through the spark plug access opening. 

Notes: The side cover has alignment pins, be careful not to damage these while attempting to open the side cover panel.