Need help with Mobile Link? Visit the Mobile Link support site.

Maintenance

  • How Do I Service the Spark Plugs in a Generac Air-Cooled Home Standby Generator?

    Explains how to inspect, gap, and replace spark plugs on Generac Next Generation Series 10–28 kW and Guardian Series 10–26 kW air-cooled standby generators. Includes model identification images, spark plug part numbers and gap specifications, spark plug locations, and series-specific service procedures to support proper generator...

  • “Something has gone wrong”, “Something's wrong”, or "Status unknown"

    Explains what the “Something has gone wrong” and “Something's wrong” statuses mean and how to address them. Customers can identify their Wi-Fi or cellular connectivity device, verify hardware and network communication, reconnect the generator when needed, and determine when to contact a dealer or Mobile Link Support for reliable generator...

  • How Do I Request A Service Call For My Home Standby Generator?

    Use Generac's online service request form to connect with a local service provider for home standby generator maintenance or repair. This article explains what information to have ready, how to submit the request, where to find the generator serial number, and what to do when service is urgent.

  • How to perform a Fuel System Leak Test

    This article outlines when and how to perform a fuel system leak test on air-cooled home standby generators. Covers pre-test checks and tools, then the procedure: safely prepare the generator, pressurize per code, apply non-corrosive leak-detection fluid to all connections, watch for persistent bubbles, repair and retest. Emphasizes...

  • How Do I Fill the Oil On My Generac Portable Generator?

    This article explains how to add engine oil to most Generac portable generators, check the oil level with the dipstick, and find the correct oil capacity for a specific model. Procedures can vary by model, owners and anyone whose generator differs from the examples should follow the owner’s manual for exact oil-fill and dipstick...

  • Running your generator for extended periods during a major outage

    The article provides guidelines on how to maintain and operate home standby generators during continuous operation. It highlights the importance of shutting down the generator for at least 30 minutes every 24 hours to perform necessary checks such as oil levels, inspections, etc. It also provides detailed instructions on oil maintenance,...

  • What type of oil should I use in my home backup generator?

    This article provides guidance on the oil requirements and maintenance tasks for Generac air-cooled home standby generators. Generac recommends the use of 5W-20 full synthetic oil for all home standby generators, but owners can also use SAE 30, 10W-30, or 5W-30 synthetic oil. Oil changes are necessary for the generator engine and this...

  • Continuous use maintenance for home standby generators

    This article explains continuous use maintenance for Generac Next Generation Series 10–28 kW and Guardian Series 10–26 kW air-cooled home standby generators running for 24 hours or longer. It covers safe shutdown, oil checks, leak inspections, maintenance intervals at 25, 100, 200, and 400 hours, extreme-temperature requirements, and...

  • Why won't my brand new generator battery stay charged?

    Single-phase generators with the Nexus or Evolution control panel must have 120VAC input to the T1 terminal on the generator. This powers the controller's internal battery charger. If there is an issue with the T1 circuit, then the battery will not keep a charge. 

No articles found
Loading